★ FLAGSHIPCAT6 Flat — 4 Pair for Lift
CC-8251G-90 · Sr No 35A Channeltech-brand lift cable, made by WIAN's parent company.CAT6 Flat — 4 Pair for Lift — 4 twisted pairs, multi-strand copper, FRLS. FRLS, multi-strand, 90 m coil pairs. IP camera in the lift.
| Construction | 4 twisted pairs, multi-strand copper, FRLS |
| Jacket | FRLS rubberised PVC · Grey |
| Use | IP camera in the lift |
| Recommended run | Up to 60 m |
| Coil | 90 m · Coil pair 90+90 · matched pairs |
Fix the cable at the shaft midpoint with the loop hanging free and never coil spare length in the car top — flexing life depends on the loop radius.
Printed from www.wian.in · +91 93262 74009 · info@wian.in · Specifications subject to change; refer to the current TDS.
Built for
Technical data
Transcribed from the Channeltech technical datasheet. The PDF carries the full high-frequency table (insertion loss, NEXT, PSNEXT, ACRF, return loss to 500 MHz).
Construction
| Conductor | Stranded bare electrolytic-grade copper, 24 AWG (7/0.195 mm) |
| Insulation | Polyolefin |
| Insulation diameter | 0.950 mm ± 0.05 mm |
| Pairing | Twisted into two core, flexible PVC sheath on each pair |
| Sheath | Flexible (elastic) PVC, grey (RAL 7035) |
| Cable diameter | 12 × 5 mm ± 0.2 mm (flat) |
Electrical
| Conductor resistance | 97.8 Ω/km max |
| Mutual capacitance | 5.6 nF/100 m max |
| Resistance unbalance | 5 % max |
| Delay skew | ≤ 45 ns/100 m |
| NVP | 69 % |
| Characteristic impedance | 100 ± 15 Ω |
Mechanical
| Minimum bend radius | ≤ 4 × cable diameter |
| Installation temperature | 0 to +50 °C |
| Operating temperature | -20 to +75 °C |
| Fire performance | IEC 60332-1 |
Standards
Enquire about CC-8251G-90
Tell us the number of cameras or the shaft height and we'll work out coils and connect you with a dealer.
CC-8251G-90 — common questions
What is CC-8251G-90?
CC-8251G-90 is the Channeltech CAT6 Flat — 4 Pair for Lift: 4 twisted pairs, multi-strand copper, frls, with an FRLS rubberised PVC jacket built to flex continuously in a lift shaft. Use: ip camera in the lift. 90 m coil pairs.
Is this a WIAN cable?
No — lift cables are Channeltech-brand products, made by WIAN's parent company Channeltech Systems Pvt Ltd and approved by leading lift OEMs.
Which lift camera does CC-8251G-90 suit?
IP cameras in the lift car — CAT6 Flat 4 Pair runs up to 60 m of shaft.
Why must a lift cable be flat and FRLS?
A lift cable flexes millions of times over its life and hangs in a shared shaft, so it needs a rubberised, flame-retardant low-smoke jacket and multi-strand conductors that do not fatigue. Ordinary round LAN cable is not built for this.